To set up utilities in your new apartment, first check which services already work, who supplies them and whose name is on each account. Then apply for new connections or account changes, record your opening meter readings and confirm the charges before you move in.
Which utilities do you need?
Ask the landlord, seller or apartment association for a written list of services available in your flat. Your building may have a shared water supply and backup power, while you pay separately for electricity, cooking gas and internet.
Check which services you can activate yourself and which need the association’s approval or access to locked service areas. Use this checklist during your handover:
- Electricity: identify the distribution company, consumer number and meter location.
- Water and sewerage: check whether you pay through a separate bill or your maintenance dues.
- Cooking gas: confirm whether your flat has piped natural gas or needs an LPG cylinder connection.
- Internet: ask which providers can connect your flat through the building’s existing ducts.
- Backup power: check availability, which appliances you can run and any separate usage charges.
- Waste collection: confirm collection arrangements and any separate household charge.
Don't assume that an installed meter, gas pipe or fibre socket means the service is active. Ask for a recent bill or ask someone to demonstrate that the service works, wherever possible.
Who is responsible for utility connections?
Before taking possession, agree in writing who will apply for each service, pay connection charges and receive any refundable deposit. If you're renting, check whether the owner wants to keep the electricity account in their name and whether the provider permits that arrangement.
Request the latest bills and payment receipts. Match the account numbers and service address to your flat, and ask the landlord or seller to settle previous occupants’ dues before handover. If the provider reports arrears, ask for written instructions on what you need to do to activate the service rather than relying on a verbal assurance.
Record meter serial numbers, readings and the possession date in the handover document. Take clear photographs of the displays and share them with the landlord or seller. Agree on these readings as the starting point for dividing the next bill.
How to apply for utility connections
Contact providers as soon as you're reasonably sure of your possession date. Ask how long applications currently take, whether you need an inspection and when you can get an appointment. Don't assume you can activate every connection on moving day.
You'll commonly need identity proof, proof of occupancy, a mobile number and an application form. Depending on the service, you may also need a registered rent agreement, ownership document, owner’s consent, an existing consumer number or details of the building’s connection.
Check the provider’s list of accepted documents before uploading anything. Use its official website, app or authorised service centre, and save your application number and payment receipt. Ask whether you need a name change, reconnection or fresh application, as each follows a different process.
If you're renting, get permission before drilling, adding wiring or changing fixed equipment. Book installation for a time when you or a trusted adult can be present. Ask the association to arrange access to meter rooms, service shafts and telecom cabinets.
How to activate your electricity connection
Give the electricity provider your flat’s consumer number if you already have a connection. Confirm the account status, registered contact details, sanctioned load and tariff category. Sanctioned load is the electrical load approved for your connection. Ask the provider whether it is enough for the appliances you plan to use.
Check whether your meter is prepaid or postpaid. For a prepaid connection, confirm the available balance and how to recharge it. For a postpaid account, note the billing cycle and due date. Ask how the provider will split the first bill between usage before and after possession.
Keep your opening meter reading with your handover records. The Ministry of Power publishes the Electricity (Rights of Consumers) Rules, which cover new connections, metering, billing and complaints. Check your distribution company’s procedure for the service you need.
If you notice damaged sockets, exposed wiring or repeated tripping, ask a qualified electrician to inspect the problem before you use the affected circuits. Never open a sealed meter or attempt a connection yourself. Also check whether you have a separate meter, tariff or load limit for backup electricity.
How to connect water, cooking gas and internet
For water, ask the association how your flat receives its supply, where you can find its isolation valve and how you'll pay for consumption. If you have an individual meter, record its reading. Check taps, toilet cisterns and visible pipe joints for leaks, and report any defects before accepting the handover.
For piped gas, contact the authorised supplier to check what you need for account transfer, inspection and activation. If you need LPG cylinders, apply through an authorised distributor and ask about the documents, deposit and installation process. Don't assume you own any equipment the previous occupant left behind.
Use authorised gas technicians to connect your gas supply and check appliance compatibility. The Health and Safety Executive explains the risks of unsafe gas appliances and why you need competent installation and maintenance. Don't connect a stove designed for one fuel to another without following the supplier’s approved conversion process.
Before paying an internet provider, confirm that it can connect your exact flat, not just your building. Ask about installation charges, router ownership, refundable deposits, plan renewal and cancellation. Test your connection after installation, including Wi-Fi coverage in the rooms where you'll work or study.
What to check on your utility bills
Keep a simple record of each provider, account number, deposit, billing cycle and contact for complaints. Check your first bill against your opening reading, activation date and agreed charges before enabling automatic payments.
Before you finish the paperwork for your move, check the following:
- Save receipts showing which deposits are refundable and how to claim them.
- Update the registered mobile number and email address wherever the provider permits.
- Check separate charges for maintenance, water, backup power and waste collection.
- Request final readings and close or transfer the accounts at your previous home.
- Return rented routers or other equipment and keep the acknowledgement.
Cancel old automatic payments only after checking your final bill and any refund due. Keep closure confirmations and handover photographs until you've settled all outstanding charges and received any deposit refunds due to you.
Sources
- Ministry of Power (powermin.gov.in)
- Domestic gas · HSE (hse.gov.uk)